Boot a laptop without the power button

Laptop power button failure is a frequent roadblock for many users. This situation causes the inability to start the device. The correct thing would be to fix the button, but it is not always feasible to do it manually or take it immediately to a service center for repair. It is feasible to start the device without the button, and it is done in two simple ways.

Boot a laptop without the power button

We do not suggest disassembling the laptop and trying to fix the button if you have never worked with this type of equipment. An incorrect action can cause the rest of the components to break. Better to call the professional services or turn on the laptop without the button, sometimes only the top of the button breaks, while the switch is still useful. To switch on the appliance, just press the switch with any convenient object.

Read also: Disassembling a laptop at home

Almost all modern laptops are equipped with a special button that enables you to open a special menu.. As usual, is somewhere on the side or on top, near the screen, and can be touched with a finger or pencil. It is feasible to turn on the laptop using this button as follows:

1. Carefully examine the case or refer to the manual to find the correct button.
2. Prepare a needle or toothpick if seated inside the box.
3. Press it once and wait for the menu to start. A small blue window should appear on the screen. Navigate through it using the keyboard arrows, select “Normal start.” and press Entered.

After a while, the operating system will start correctly. Anyway, you can use this button all the time, but it is not always convenient and causes some difficulties. That is why it is better to configure certain parameters through the BIOS. Read more about them below.

Method 2: power function

It is better to consider in advance how to turn on the laptop if the home button is broken. At the same time, this method will be useful for those who start the system through the start menu. You only have to configure certain parameters and you can turn on the laptop from the keyboard. Follow the instructions:

1. Access the BIOS through the boot menu or any other convenient method.

Read more: How to enter your computer's BIOS

2. Go to “Power management settings” O “Can”.. Partition names may vary depending on the BIOS manufacturer.
3. Locate the post “Power-on function” and put it in “Any key”.
4. Now you can reboot the device, but don't forget to save the settings before exiting.

Thanks to the change of this configuration, the notebook can be started by pressing absolutely any key on the keyboard. Once you have fixed the power key, you can reset the settings in the same way if you are not satisfied with these settings.

Today we break down two options that allow you to turn on the mobile computer without the respective button. These methods allow you not to disassemble the device for manual repair and not have to urgently take it to the service center for repair..

Read also: How to charge a laptop battery without it

Has this post helped you?