How to install windows xp from usb? The platform Windows XP It was undoubtedly the most stable and preferred by many users thanks to its simplicity and low weight. At this time you no longer have updates from Microsoft, but you can continue to use it on your computer if you want.
You should know that more than one program no longer runs on that operating system, but if you are a person of customs Simple, how to play old-time games and use old software, you can use Windows XP without problems. Fundamentally, when you must run specific programs or due to hardware limitations.
To install it, first you have to have the operating system installation disc, but failing that, you can use a usb stick. This is especially useful when you do not have a disk drive in your UPC.
Installation procedure
Before starting you should know that it is not feasible to install Windows XP on hard drives SATA. Therefore, you need to make sure your device is not of this type.
To install Windows XP, You need to create a bootable flash drive by means of a program and empty the ISO file from the system Windows XP. This program is called WinSetupFromUSB. Follow the steps described in the following lines to learn how to do it:
Make a USB stick
- Download the software from http://www.winsetupfromusb.com/downloads/ and extract the file. Then proceed to run it.
- A window will appear where you must choose the USB drive to use. Go to option RMPrepUSB, where will proceed to format it.
- Immediately afterwards you will find a window with multiple options in a single view. You must select FAT 32 in the System Files and Updates section and then click Prepare USB Flash Drive, in the lower left corner of the window.
- Once the procedure is finished, click on Shall.
Emptying the Windows ISO
- Once the drive has been formatted and you clicked exit, will be in the first window of the software. You will see at the bottom a bar with the address of the Windows XP ISO inside the computer's memory. If you are not at the bar, you must click on the ellipsis icon to find the folder with the ISO
- To end, press go so this ISO is flushed into the USB. Once the procedure is finished, you must turn on the computer from the USB memory. Select the first part of Windows XP setup and after restarting the PC, select the second part of the Windows XP setup.
Windows XP installation
- After creating your flash device with the ISO of Windows, you already have everything at hand to install the operating system. You will need to change the boot drive in the PC BIOS.
- The procedure starts when you restart the PC. The USB stick will continue to check if you already have Windows XP on your computer. Once this is done, a blue screen will appear with a license agreement, press F 8 to proceed to configure Windows XP. Click on escape so that the program does not repair the current installation.
- Later it will proceed to delete the hard drive partition has, pressing the D key and then the L key to confirm the deletion. Press enter to choose the partition where Windows XP will be installed. Then proceed to select the type of installation; quick i standard and hit enter.
- The installation procedure will begin and you will see how it progresses in a percentage progress bar. Once finished, the computer will restart, so you can start the keyboard setup procedure, the name of the computer, the time zone, screen and password. After that, the procedure will have
