Correct the error “Intel CPU uCode load error”.
Error “Intel uCode CPU load error” Occurs more often when motherboard or CPU is changed or upgraded. By itself, means motherboard and CPU are incompatible with each other. In this post the alternatives to solve this problem are analyzed.
How To Fix Intel CPU uCode Loading Error
Don't be afraid of having to change your CPU or motherboard again, because the incompatibility does not manifest itself at the hardware level, because if not, you would not have inserted the CPU into the motherboard. At the same time, this malfunction is not critical, and the system can work safely as is, but nobody guarantees that there are no failures, and every time the computer starts, press “F1” it can be quite painful. The answer to this problem is to update the BIOS or clear the need to press the necessary key every time the PC boots..
Read also:
What is BIOS
How to enter your computer's BIOS
Method 1: update BIOS
The best thing to do is upgrade the subsystem, since sooner or later the incompatibility can lead to more serious problems and failures, not to mention the decrease in CPU performance. To actualize, you will need to download the latest BIOS firmware from the motherboard manufacturer's official web portal, enter BIOS and go to “Instruments”. From there, press “Come in”.in the line that is responsible for updating the subsystem, as an example “ASUS EZ Flash 2”and follow the instructions. This procedure has been covered in more detail in our other materials at the links below.
Read also:
How to update your computer's BIOS
BIOS firmware options
When updating, will eliminate the problem and, at the same time, will make sure the processor and motherboard are compatible, which is useful not only for the comfort of your computer, but also to avoid possible associated system failures.
If this method doesn't work, you must take the motherboard to a service center. In this circumstance, a fault or failure may be suspected at a deeper level, which means a special tool is needed: a programmer, whose handling cannot be carried out by any user.
Method 2: disable error reporting
In case the BIOS update fails for any reason, it is feasible to erase the need for an error response from the user. To apply this method, enter BIOS and do the following steps:
- Go to “world”. and selecting the line “Configure boot settings”, press the key “Come in”.
- Highlight the line “Wait” F1 “if there is an error”, set its value to “Disabled” and press “Come in”..
- Press the key. “F10” and save the change by selecting “OKEY”..
This way, will not resolve the error, but now the system will not require you to press “F1” every start and it will start automatically. Despite this, As it was mentioned already, this can lead to system degradation, In other words, new more serious faults, or that the error does not allow the CPU to function at full capacity, causing hangs and "brakes" when working with resource intensive applications.
Read also:
What to do if the computer hangs with the motherboard logo
Causes of PC performance degradation and troubleshooting
The methods considered address the user problem with the resulting CPU and motherboard compatibility error, either by removing it entirely or by removing the need to respond to it.
We are glad we were able to help you fix the problem..
Our specialists will try to respond as soon as possible.
