Bug fixed “DEAD CRITICAL PROCESS” in Windows 8

Rubbing the palms of the hands in anticipation of fruitful work or exciting leisure, Turn on the computer. And you freeze in disappointment: on the monitor you see the call “blue screen of death” and the name of the error “THE CRITICAL PROCESS DIED”. If translated literally from English: “The critical procedure is dead”.. Is It Really Time To Take Your Computer In For Repair? But take your time, do not despair, no hopeless situations. Let's investigate it.

How to correct the error “DEAD CRITICAL PROCESS” in Windows 8

The error “CRITICAL PROCESS DIED” not uncommon in Windows operating system 8 and it may be due to the following reasons:

• Hard drive or RAM board hardware failure;
• The drivers for the devices installed in the system are outdated or not working properly;
• Registry and file system corruption;
• An infection with a computer virus has occurred;
• After installing the new hardware, your controllers conflicted.

To correct the error “The critical procedure is dead”, we are going to try to carry out the activities in a logical sequence to resuscitate the system.

Paso 1: start Windows in safe mode

To check for viruses, update device drivers and system restore, you need to start Windows in safe mode; opposite case, it will not be feasible to perform error recovery operations.

To enter safe mode when Windows starts, use the key combination “Shift + F8”.. After reboot, any antivirus software should be running.

Paso 2: use the SFC.

Windows 8 has a built-in tool to verify and restore the integrity of system files. The SFC utility will scan your hard drive and look for unmodified components.

1. On the keyboard, press the key combination To win + Xand in the menu that opens select “Command line (administrator)”.
2. On the command line, enter sfc/scannow and confirm the test with the key “Come in”..
3. The SFC starts a system scan, which may take between 10 Y 20 minutes.
4. View the results of the Windows resource scan, restart your computer, if the error persists, try another way.

Paso 3: use a recovery point

You can try booting the latest working version of the system from a restore point, and, of course, one was created automatically or by the user himself.

1. Press the familiar key combination To win + Xand choose from the menu “Control Panel”..
2. Then, we go to the section “Security system”.
3. Then, let's click on the block. “System”..
4. In the next window, we need an element. “System protection”..
5. In the section. “System restore.” categorize “Restore”..
6. Choose to what extent we are going to reverse the system and, after thinking it through, confirm our actions with the “Next”..
7. Once the procedure is complete, the system will return to the selected operational edition.

Paso 4: update device settings

Software crashes often occur when new devices are connected and their control files are updated. Carefully examine the status of the devices installed in the system.

1. Sequentially pressing. To win + X and “Device administrator”..
2. In the window that appears, make sure there are no yellow exclamation marks in the hardware installed listing. If there are, Click on the icon Icon “Update hardware configuration”..
3. Have the exclamation marks disappeared? So all devices are working properly.

Paso 5: Replacing the RAM modules

The problem may be a malfunction of your computer hardware. If there are multiple RAM boards, you can try to exchange them, remove each one and verify Windows startup. If you find faulty hardware, you must replace it with a new one.

Read also: How to check RAM performance

Paso 6: reinstale Windows

If none of the above methods helped, all that remains is to format the system partition of the hard drive and reinstall Windows. This is a last resort, but from time to time you need to sacrifice valuable data.

You can read how to reinstall Windows 8 following the link below.

Read more: Windows operating system installation 8

Following the six steps to correct the error “THE CRITICAL PROCESS DIED”We are 99,9% sure to fix pc malfunction. Now we can once again enjoy the fruits of technical progress.

Has this post helped you?